From fe6ee945cff1af1c490aa57d5959bbdb39d4e45d Mon Sep 17 00:00:00 2001
From: Sgr A* VMT <1611902585@qq.com>
Date: Sat, 13 Apr 2024 13:05:13 +0000
Subject: [PATCH 1/3] =?UTF-8?q?add=20=E4=B8=AD=E6=96=87=E6=95=99=E7=A8=8B/?=
 =?UTF-8?q?klipper=E5=AE=98=E6=96=B9=E6=B6=A1=E6=B5=81=E4=BC=A0=E6=84=9F?=
 =?UTF-8?q?=E5=99=A8=E7=9B=B8=E5=85=B3=E9=85=8D=E7=BD=AE.?=
MIME-Version: 1.0
Content-Type: text/plain; charset=UTF-8
Content-Transfer-Encoding: 8bit

Signed-off-by: Sgr A* VMT <1611902585@qq.com>
---
 中文教程/klipper官方涡流传感器相关配置 | 24 ++++++++++++++++++++++++
 1 file changed, 24 insertions(+)
 create mode 100644 中文教程/klipper官方涡流传感器相关配置

diff --git a/中文教程/klipper官方涡流传感器相关配置 b/中文教程/klipper官方涡流传感器相关配置
new file mode 100644
index 0000000..f7b7aa1
--- /dev/null
+++ b/中文教程/klipper官方涡流传感器相关配置
@@ -0,0 +1,24 @@
+```
+[mcu idm]
+serial:
+#canbus_uuid:
+
+[probe_eddy_current eddy]
+sensor_type: ldc1612
+i2c_mcu: idm
+i2c_bus: i2c1
+x_offset: 0
+y_offset: 21.1
+speed:40
+lift_speed: 15.
+
+[thermistor ntc47k]
+temperature1:25.
+resistance1:47000
+beta:4010
+
+[probe_drift_adjust]
+sensor_type:ntc47k
+sensor_pin:idm:PA4
+pullup_resistor:10000
+```

From 7c8574d786425d97e4ed740858a42dff04184ff0 Mon Sep 17 00:00:00 2001
From: Sgr A* VMT <1611902585@qq.com>
Date: Sat, 13 Apr 2024 13:05:33 +0000
Subject: [PATCH 2/3] =?UTF-8?q?rename=20=E4=B8=AD=E6=96=87=E6=95=99?=
 =?UTF-8?q?=E7=A8=8B/klipper=E5=AE=98=E6=96=B9=E6=B6=A1=E6=B5=81=E4=BC=A0?=
 =?UTF-8?q?=E6=84=9F=E5=99=A8=E7=9B=B8=E5=85=B3=E9=85=8D=E7=BD=AE=20to=20?=
 =?UTF-8?q?=E4=B8=AD=E6=96=87=E6=95=99=E7=A8=8B/klipper=E5=AE=98=E6=96=B9?=
 =?UTF-8?q?=E6=B6=A1=E6=B5=81=E4=BC=A0=E6=84=9F=E5=99=A8=E7=9B=B8=E5=85=B3?=
 =?UTF-8?q?=E9=85=8D=E7=BD=AE.md.?=
MIME-Version: 1.0
Content-Type: text/plain; charset=UTF-8
Content-Transfer-Encoding: 8bit

Signed-off-by: Sgr A* VMT <1611902585@qq.com>
---
 ...per官方涡流传感器相关配置 => klipper官方涡流传感器相关配置.md} | 0
 1 file changed, 0 insertions(+), 0 deletions(-)
 rename 中文教程/{klipper官方涡流传感器相关配置 => klipper官方涡流传感器相关配置.md} (100%)

diff --git a/中文教程/klipper官方涡流传感器相关配置 b/中文教程/klipper官方涡流传感器相关配置.md
similarity index 100%
rename from 中文教程/klipper官方涡流传感器相关配置
rename to 中文教程/klipper官方涡流传感器相关配置.md

From 877a5c2600f9190dff276e6e325c0573c440d6f1 Mon Sep 17 00:00:00 2001
From: Sgr A* VMT <1611902585@qq.com>
Date: Sat, 13 Apr 2024 13:17:43 +0000
Subject: [PATCH 3/3] eddy up

Signed-off-by: Sgr A* VMT <1611902585@qq.com>
---
 中文教程/klipper官方涡流传感器相关配置.md | 39 +++++++++++++++++++++++
 1 file changed, 39 insertions(+)

diff --git a/中文教程/klipper官方涡流传感器相关配置.md b/中文教程/klipper官方涡流传感器相关配置.md
index f7b7aa1..c823c36 100644
--- a/中文教程/klipper官方涡流传感器相关配置.md
+++ b/中文教程/klipper官方涡流传感器相关配置.md
@@ -1,3 +1,6 @@
+### 固件视频
+刷入[klipper_eddy_firmware](/klipper_eddy_firmware)下的固件(根据通讯方式选择)  
+### 配置
 ```
 [mcu idm]
 serial:
@@ -22,3 +25,39 @@ sensor_type:ntc47k
 sensor_pin:idm:PA4
 pullup_resistor:10000
 ```
+###  操作说明
+首先`SET_KINEMATIC_POSITION z=80`  
+然后控制打印头到热床中央2cm高的位置,执行`LDC_CALIBRATE_DRIVE_CURRENT CHIP=eddy`和`PROBE_EDDY_CURRENT_CALIBRATE CHIP=eddy`  
+此时校准步骤完成。  
+整床扫描使用`BED_MESH_CALIBRATE METHOD=scan SCAN_MODE=rapid`  
+
+### QGL使用扫描模式
+```
+[gcode_macro QUAD_GANTRY_LEVEL]   #随着龙门高低差降低降低探测高度
+rename_existing: _QUAD_GANTRY_LEVEL
+gcode:
+    SAVE_GCODE_STATE NAME=STATE_QGL
+    BED_MESH_CLEAR
+    {% if not printer.quad_gantry_level.applied %}
+      _QUAD_GANTRY_LEVEL horizontal_move_z=10 retry_tolerance=1
+    {% endif %}
+    _QUAD_GANTRY_LEVEL horizontal_move_z=2 METHOD=scan
+    # G28 Z
+    RESTORE_GCODE_STATE NAME=STATE_QGL
+```
+### z_tilt使用扫描模式
+```
+[gcode_macro Z_TILT_ADJUST]
+rename_existing: _Z_TILT_ADJUST
+gcode:
+    SAVE_GCODE_STATE NAME=STATE_Z_TILT
+    BED_MESH_CLEAR
+    {% if not printer.z_tilt.applied %}
+      _Z_TILT_ADJUST horizontal_move_z=10 retry_tolerance=1
+    {% endif %}
+    _Z_TILT_ADJUST horizontal_move_z=2 METHOD=scan
+    # G28 Z
+    RESTORE_GCODE_STATE NAME=STATE_Z_TILT
+```
+### 温补校准
+PROBE_DRIFT_CALIBRATE COUNT=6 AUTOSTEP=7
\ No newline at end of file