diff --git a/English Documents/temperature compensation calibrate.md b/English Documents/temperature compensation calibrate.md
index 008cfa9..204dd6c 100644
--- a/English Documents/temperature compensation calibrate.md	
+++ b/English Documents/temperature compensation calibrate.md	
@@ -51,25 +51,11 @@ gcode:
   IDM_STREAM FILENAME=data3
   M104 S0
   M140 S0
-  M106 S255
-  G0 Z80
-  TEMPERATURE_WAIT SENSOR='temperature_sensor IDM_coil' MAXIMUM={min_temp}
-  M106 S0
-  G28 Z0
-  G0 Z5
-  M104 S{nozzle_temp}
-  M140 S{bed_temp}
-  G4 P1000
-  IDM_STREAM FILENAME=data4
-  TEMPERATURE_WAIT SENSOR='temperature_sensor IDM_coil' MINIMUM={max_temp}
-  IDM_STREAM FILENAME=data4
-  M104 S0
-  M140 S0
 ```
 
 **Step 2:** Execute `DATA_SAMPLE BED_TMEP=<target bed temperature> NOZZLE_TEMP=<target nozzle temperature> MIN_TEMP=<minimum temperature of sampling range> MAX_TEMP=<maximum temperature of samping range>`  
 if you dont input any parameter,it will run with default parameters(BED_TEMP=90 NOZZLE_TEMP=250 MIN_TEMP=40 MAX_TEMP=70).  
-This will generate four files (data1, data2, data3, data4) in the klipper folder. This process takes a long time.  
+This will generate 3 files (data1, data2, data3) in the klipper folder. This process takes a long time.  
 
 **Step 3:** Move the four generated files to the IDM folder in your user directory.
 
diff --git a/中文教程/温补参数测算教程.md b/中文教程/温补参数测算教程.md
index 9a682d8..2ffb93f 100644
--- a/中文教程/温补参数测算教程.md
+++ b/中文教程/温补参数测算教程.md
@@ -52,7 +52,7 @@ gcode:
 
 使用`DATA_SAMPLE BED_TEMP=指定热床温度 NOZZLE=指定喷嘴温度 MIN_TEMP=采集温度范围最小值 MAX_TEMP=采集温度范围最大值`  
 (若不输入自定义参数，宏将按默认值运行(BED_TEMP=90 NOZZLE_TEMP=250 MIN_TEMP=40 MAX_TEMP=70))  
-即可开始采集数据，之后会在klipper文件夹中生成data1,data2,data3,data4 四个文件，耗时较长。  
+即可开始采集数据，之后会在klipper文件夹中生成data1,data2,data3 三个文件，耗时较长。  
 完成后将4个文件移动到用户目录下的IDM文件夹中。
 然后执行
 ```