reijii/klippain-shaketune-telegramm
1
0
Fork 0
Code Issues Pull Requests Actions Packages Projects Releases Wiki Activity

using my own resonance tester algorithm

Browse Source
This commit is contained in:
Félix Boisselier
2024-05-12 20:58:53 +02:00
parent 187ba13c98
commit 375190610c
12 changed files with 317 additions and 91 deletions
Download Patch File Download Diff File Expand all files Collapse all files

11
docs/macros/belts_tuning.md
View File

@@ -11,11 +11,12 @@ Then, call the `COMPARE_BELTS_RESPONSES` macro and look for the graphs in the re
| parameters | default value | description |
|-----------:|---------------|-------------|
|FREQ_START|5|Starting excitation frequency|
|FREQ_END|133|Maximum excitation frequency|
|HZ_PER_SEC|1|Number of Hz per seconds for the test|
|KEEP_N_RESULTS|3|Total number of results to keep in the result folder after running the test. The older results are automatically cleaned up|
|KEEP_CSV|0|Weither or not to keep the CSV data files alonside the PNG graphs|
|FREQ_START|5|starting excitation frequency|
|FREQ_END|133|maximum excitation frequency|
|HZ_PER_SEC|1|number of Hz per seconds for the test|
|ACCEL_PER_HZ|None|accel per Hz value used for the test. If unset, it will use the value from your `[resonance_tester]` config section (75 is the default)|
|TRAVEL_SPEED|120|speed in mm/s used for all the travel movements (to go to the start position prior to the test)|
|Z_HEIGHT|None|Z height wanted for the test. This value can be used if needed to override the Z value of the probe_point set in your `[resonance_tester]` config section|
## Graphs description