reijii/klippain-shaketune-telegramm
1
0 Fork 0
Code Issues Pull Requests Actions Packages Projects Releases Wiki Activity

Merge branch 'develop' into dir_vib

Browse Source
This commit is contained in:
Félix Boisselier authored and GitHub committed 2024-04-09 12:10:39 +02:00
2 parents 51f2efb5f8 0a25344b0c
commit 53bee00517
5 files changed
+9 -9
Download Patch File Download Diff File Expand all files Collapse all files

No files matched your search

K-ShakeTune/K-SnT_axes_map.cfg
+3 -3
View File
@@ -16,7 +16,7 @@ gcode:
{% set accel = [accel, printer.configfile.settings.printer.max_accel]|min %}
{% set old_accel = printer.toolhead.max_accel %}
{% set old_accel_to_decel = printer.toolhead.max_accel_to_decel %}
{% set old_cruise_ratio = printer.toolhead.minimum_cruise_ratio %}
{% set old_sqv = printer.toolhead.square_corner_velocity %}
@@ -34,7 +34,7 @@ gcode:
G90
# Set the wanted acceleration values (not too high to avoid oscillation, not too low to be able to reach constant speed on each segments)
SET_VELOCITY_LIMIT ACCEL={accel} ACCEL_TO_DECEL={accel} SQUARE_CORNER_VELOCITY={[(accel / 1000), 5.0]|max}
SET_VELOCITY_LIMIT ACCEL={accel} MINIMUM_CRUISE_RATIO=0 SQUARE_CORNER_VELOCITY={[(accel / 1000), 5.0]|max}
# Going to the start position
G1 Z{z_height} F{feedrate_travel / 8}
@@ -55,6 +55,6 @@ gcode:
RUN_SHELL_COMMAND CMD=shaketune PARAMS="--type axesmap --accel {accel|int} --chip_name {accel_chip}"
# Restore the previous acceleration values
SET_VELOCITY_LIMIT ACCEL={old_accel} ACCEL_TO_DECEL={old_accel_to_decel} SQUARE_CORNER_VELOCITY={old_sqv}
SET_VELOCITY_LIMIT ACCEL={old_accel} MINIMUM_CRUISE_RATIO={old_cruise_ratio} SQUARE_CORNER_VELOCITY={old_sqv}
RESTORE_GCODE_STATE NAME=STATE_AXESMAP_CALIBRATION
K-ShakeTune/K-SnT_vibrations.cfg
+3 -3
View File
@@ -25,7 +25,7 @@ gcode:
{% set accel = [accel, printer.configfile.settings.printer.max_accel]|min %}
{% set old_accel = printer.toolhead.max_accel %}
{% set old_accel_to_decel = printer.toolhead.max_accel_to_decel %}
{% set old_cruise_ratio = printer.toolhead.minimum_cruise_ratio %}
{% set old_sqv = printer.toolhead.square_corner_velocity %}
{% set kinematics = printer.configfile.settings.printer.kinematics %}
@@ -53,7 +53,7 @@ gcode:
G90
# Set the wanted acceleration values (not too high to avoid oscillation, not too low to be able to reach constant speed on each segments)
SET_VELOCITY_LIMIT ACCEL={accel} ACCEL_TO_DECEL={accel} SQUARE_CORNER_VELOCITY={[(accel / 1000), 5.0]|max}
SET_VELOCITY_LIMIT ACCEL={accel} MINIMUM_CRUISE_RATIO=0 SQUARE_CORNER_VELOCITY={[(accel / 1000), 5.0]|max}
# Going to the start position
G1 Z{z_height} F{feedrate_travel / 10}
@@ -165,6 +165,6 @@ gcode:
RUN_SHELL_COMMAND CMD=shaketune PARAMS="--type clean --keep_results {keep_results}"
# Restore the previous acceleration values
SET_VELOCITY_LIMIT ACCEL={old_accel} ACCEL_TO_DECEL={old_accel_to_decel} SQUARE_CORNER_VELOCITY={old_sqv}
SET_VELOCITY_LIMIT ACCEL={old_accel} MINIMUM_CRUISE_RATIO={old_cruise_ratio} SQUARE_CORNER_VELOCITY={old_sqv}
RESTORE_GCODE_STATE NAME=CREATE_VIBRATIONS_PROFILE