reijii/klippain-shaketune-telegramm
1
0
Fork 0
Code Issues Pull Requests Actions Packages Projects Releases Wiki Activity

small documentation update about default parameters

Browse Source
This commit is contained in:
Félix Boisselier
2024-06-17 19:53:13 +02:00
parent b98d103a26
commit 69ad228356
3 changed files with 7 additions and 7 deletions
Download Patch File Download Diff File Expand all files Collapse all files

6
docs/macros/compare_belts_responses.md
View File

@@ -15,10 +15,10 @@ Then, call the `COMPARE_BELTS_RESPONSES` macro and look for the graphs in the re
| parameters | default value | description |
|-----------:|---------------|-------------|
|FREQ_START|5|starting excitation frequency|
|FREQ_END|133|maximum excitation frequency|
|FREQ_START|None (default to `[resonance_tester]` value)|starting excitation frequency|
|FREQ_END|None (default to `[resonance_tester]` value)|maximum excitation frequency|
|HZ_PER_SEC|1|number of Hz per seconds for the test|
|ACCEL_PER_HZ|None|accel per Hz value used for the test. If unset, it will use the value from your `[resonance_tester]` config section (75 is the default)|
|ACCEL_PER_HZ|None (default to `[resonance_tester]` value)|accel per Hz value used for the test|
|TRAVEL_SPEED|120|speed in mm/s used for all the travel movements (to go to the start position prior to the test)|
|Z_HEIGHT|None|Z height wanted for the test. This value can be used if needed to override the Z value of the probe_point set in your `[resonance_tester]` config section|