some cleaning

K-ShakeTune/K-SnT_belts.cfg

@@ -0,0 +1,24 @@
+################################################
+###### STANDARD INPUT_SHAPER CALIBRATIONS ######
+################################################
+# Written by Frix_x#0161 #
+
+[gcode_macro BELTS_SHAPER_CALIBRATION]
+description: Perform a custom half-axis test to analyze and compare the frequency profiles of individual belts on CoreXY printers
+gcode:
+    {% set verbose = params.VERBOSE|default(true) %}
+    {% set min_freq = params.FREQ_START|default(5)|float %}
+    {% set max_freq = params.FREQ_END|default(133.33)|float %}
+    {% set hz_per_sec = params.HZ_PER_SEC|default(1)|float %}
+
+    TEST_RESONANCES AXIS=1,1 OUTPUT=raw_data NAME=b FREQ_START={min_freq} FREQ_END={max_freq} HZ_PER_SEC={hz_per_sec}
+    M400
+
+    TEST_RESONANCES AXIS=1,-1 OUTPUT=raw_data NAME=a FREQ_START={min_freq} FREQ_END={max_freq} HZ_PER_SEC={hz_per_sec}
+    M400
+
+    {% if verbose %}
+        RESPOND MSG="Belts comparative frequency profile generation..."
+        RESPOND MSG="This may take some time (3-5min)"
+    {% endif %}
+    RUN_SHELL_COMMAND CMD=shaketune PARAMS=BELTS