reijii/klippain-shaketune-telegramm
1
0
Fork 0
Code Issues Pull Requests Actions Packages Projects Releases Wiki Activity

fix gcmd error that wasn't sent correctly

Browse Source
This commit is contained in:
Félix Boisselier
2024-06-04 22:09:54 +02:00
parent f9e5d64eac
commit 867d0c90a0
6 changed files with 21 additions and 21 deletions
Download Patch File Download Diff File Expand all files Collapse all files

8
shaketune/measurement/belts_comparison.py
View File

@@ -40,11 +40,11 @@ def compare_belts_responses(gcmd, config, st_process: ShakeTuneProcess) -> None:
# For CoreXZ kinematics, we can use the X axis accelerometer as most of the time they are moving bed printers
accel_chip = Accelerometer.find_axis_accelerometer(printer, 'x')
else:
gcmd.error('Only CoreXY and CoreXZ kinematics are supported for the belt comparison tool!')
raise gcmd.error('Only CoreXY and CoreXZ kinematics are supported for the belt comparison tool!')
ConsoleOutput.print(f'{motors_config_parser.kinematics.upper()} kinematics mode')
if accel_chip is None:
gcmd.error(
raise gcmd.error(
'No suitable accelerometer found for measurement! Multi-accelerometer configurations are not supported for this macro.'
)
accelerometer = Accelerometer(printer.lookup_object(accel_chip))
@@ -52,10 +52,10 @@ def compare_belts_responses(gcmd, config, st_process: ShakeTuneProcess) -> None:
# Move to the starting point
test_points = res_tester.test.get_start_test_points()
if len(test_points) > 1:
gcmd.error('Only one test point in the [resonance_tester] section is supported by Shake&Tune.')
raise gcmd.error('Only one test point in the [resonance_tester] section is supported by Shake&Tune.')
if test_points[0] == (-1, -1, -1):
if z_height is None:
gcmd.error(
raise gcmd.error(
'Z_HEIGHT parameter is required if the test_point in [resonance_tester] section is set to -1,-1,-1'
)
# Use center of bed in case the test point in [resonance_tester] is set to -1,-1,-1