reijii/klippain-shaketune-telegramm
1
0
Fork 0
Code Issues Pull Requests Actions Packages Projects Releases Wiki Activity

Compatibility with Klipper < v0.12.0-239 (#129)

Browse Source
This commit is contained in:
delisjr
2024-06-19 15:59:54 +08:00
committed by GitHub
parent 69ad228356
commit 90ed7aca3c
4 changed files with 44 additions and 19 deletions
Download Patch File Download Diff File Expand all files Collapse all files

16
shaketune/commands/axes_map_calibration.py
View File

@@ -41,11 +41,15 @@ def axes_map_calibration(gcmd, config, st_process: ShakeTuneProcess) -> None:
toolhead_info = toolhead.get_status(systime)
old_accel = toolhead_info['max_accel']
old_mcr = toolhead_info['minimum_cruise_ratio']
old_sqv = toolhead_info['square_corner_velocity']
# set the wanted acceleration values
gcode.run_script_from_command(f'SET_VELOCITY_LIMIT ACCEL={accel} MINIMUM_CRUISE_RATIO=0 SQUARE_CORNER_VELOCITY=5.0')
if 'minimum_cruise_ratio' in toolhead_info:
old_mcr = toolhead_info['minimum_cruise_ratio'] # minimum_cruise_ratio found: Klipper >= v0.12.0-239
gcode.run_script_from_command(f'SET_VELOCITY_LIMIT ACCEL={accel} MINIMUM_CRUISE_RATIO=0 SQUARE_CORNER_VELOCITY=5.0')
else: # minimum_cruise_ratio not found: Klipper < v0.12.0-239
old_mcr = None
gcode.run_script_from_command(f'SET_VELOCITY_LIMIT ACCEL={accel} SQUARE_CORNER_VELOCITY=5.0')
# Deactivate input shaper if it is active to get raw movements
input_shaper = printer.lookup_object('input_shaper', None)
@@ -89,9 +93,11 @@ def axes_map_calibration(gcmd, config, st_process: ShakeTuneProcess) -> None:
input_shaper.enable_shaping()
# Restore the previous acceleration values
gcode.run_script_from_command(
f'SET_VELOCITY_LIMIT ACCEL={old_accel} MINIMUM_CRUISE_RATIO={old_mcr} SQUARE_CORNER_VELOCITY={old_sqv}'
)
if old_mcr is not None: # minimum_cruise_ratio found: Klipper >= v0.12.0-239
gcode.run_script_from_command(f'SET_VELOCITY_LIMIT ACCEL={old_accel} MINIMUM_CRUISE_RATIO={old_mcr} SQUARE_CORNER_VELOCITY={old_sqv}')
else: # minimum_cruise_ratio not found: Klipper < v0.12.0-239
gcode.run_script_from_command(f'SET_VELOCITY_LIMIT ACCEL={old_accel} SQUARE_CORNER_VELOCITY={old_sqv}')
toolhead.wait_moves()
# Run post-processing