diff --git a/docs/macros/axis_tuning.md b/docs/macros/axis_tuning.md
index 842cd68..f124b4c 100644
--- a/docs/macros/axis_tuning.md
+++ b/docs/macros/axis_tuning.md
@@ -11,7 +11,7 @@ Then, call the `AXES_SHAPER_CALIBRATION` macro and look for the graphs in the re
 
 | parameters | default value | description |
 |-----------:|---------------|-------------|
-|VERBOSE|1|Wether to log things in the console|
+|VERBOSE|1|Whether or not to log things in the console|
 |FREQ_START|5|Starting excitation frequency|
 |FREQ_END|133|Maximum excitation frequency|
 |HZ_PER_SEC|1|Number of Hz per seconds for the test|
diff --git a/docs/macros/belts_tuning.md b/docs/macros/belts_tuning.md
index 2e60cc2..1365cac 100644
--- a/docs/macros/belts_tuning.md
+++ b/docs/macros/belts_tuning.md
@@ -11,7 +11,7 @@ Then, call the `BELTS_SHAPER_CALIBRATION` macro and look for the graphs in the r
 
 | parameters | default value | description |
 |-----------:|---------------|-------------|
-|VERBOSE|1|Wether to log things in the console|
+|VERBOSE|1|Whether or not to log things in the console|
 |FREQ_START|5|Starting excitation frequency|
 |FREQ_END|133|Maximum excitation frequency|
 |HZ_PER_SEC|1|Number of Hz per seconds for the test|
diff --git a/docs/macros/vibrations_tuning.md b/docs/macros/vibrations_tuning.md
index 309ad27..f106819 100644
--- a/docs/macros/vibrations_tuning.md
+++ b/docs/macros/vibrations_tuning.md
@@ -16,7 +16,7 @@ Call the `VIBRATIONS_CALIBRATION` macro with the direction and speed range you w
 |SIZE|60|size in mm of the area where the movements are done|
 |DIRECTION|"XY"|direction vector where you want to do the measurements. Can be set to either "XY", "AB", "ABXY", "A", "B", "X", "Y", "Z", "E"|
 |Z_HEIGHT|20|z height to put the toolhead before starting the movements. Be careful, if your ADXL is under the nozzle, increase it to avoid a crash of the ADXL on the bed of the machine|
-|VERBOSE|1|Wether to log the current speed in the console|
+|VERBOSE|1|Whether or not to log the current speed in the console|
 |ACCEL|3000 (or max printer accel)|accel in mm/s^2 used for all the moves. Try to keep it relatively low to avoid bad oscillations that affect the measurements, but but high enough to reach constant speed for >~70% of the segments|
 |MIN_SPEED|20|minimum speed of the toolhead in mm/s for the movements|
 |MAX_SPEED|200|maximum speed of the toolhead in mm/s for the movements|