reijii/klippain-shaketune-telegramm
1
0
Fork 0
Code Issues Pull Requests Actions Packages Projects Releases Wiki Activity

small code cleaning and fixes

Browse Source
This commit is contained in:
Félix Boisselier
2024-06-24 18:47:25 +02:00
parent a49a571911
commit e3e24184be
3 changed files with 61 additions and 48 deletions
Download Patch File Download Diff File Expand all files Collapse all files

12
README.md
View File

@@ -33,22 +33,22 @@ Follow these steps to install Shake&Tune on your printer:
# The maximum time in seconds to let Shake&Tune process the CSV files and generate the graphs.
# motor_freq:
# /!\ This option is only available in DangerKlipper /!\
# /!\ This option has limitations in stock Klipper and is best used with DangerKlipper /!\
# Frequencies of X and Y motor resonances to filter them using
# composite shapers. This require the `[input_shaper]` config
# composite shapers. This requires the `[input_shaper]` config
# section to be defined in your printer.cfg file to work.
# motor_freq_x:
# motor_freq_y:
# /!\ This option is only available in DangerKlipper /!\
# /!\ This option has limitations in stock Klipper and is best used with DangerKlipper /!\
# If motor_freq is not set, these two parameters can be used
# to configure different filters for X and Y motors. The same
# values are supported as for motor_freq parameter.
# motor_damping_ratio: 0.05
# /!\ This option is only available in DangerKlipper /!\
# Damping ratios of X and Y motor resonances.
# /!\ This option has limitations in stock Klipper and is best used with DangerKlipper /!\
# Damping ratios for X and Y motor resonances.
# motor_damping_ratio_x:
# motor_damping_ratio_y:
# /!\ This option is only available in DangerKlipper /!\
# /!\ This option has limitations in stock Klipper and is best used with DangerKlipper /!\
# If motor_damping_ratio is not set, these two parameters can be used
# to configure different filters for X and Y motors. The same values
# are supported as for motor_damping_ratio parameter.