reijii/klippain-shaketune-telegramm
1
0
Fork 0
Code Issues Pull Requests Actions Packages Projects Releases Wiki Activity

fixed parameter handling that was buggy for some WebUI when run and not setting all the params

Browse Source
This commit is contained in:
Félix Boisselier
2024-04-18 23:19:35 +02:00
parent 2cc9ac63e6
commit f0f12a613a
6 changed files with 11 additions and 7 deletions
Download Patch File Download Diff File Expand all files Collapse all files

8
K-ShakeTune/K-SnT_axis.cfg
View File

@@ -13,7 +13,7 @@ gcode:
{% set scv = params.SCV|default(None) %}
{% set max_sm = params.MAX_SMOOTHING|default(None) %}
{% set keep_results = params.KEEP_N_RESULTS|default(3)|int %}
{% set keep_csv = params.KEEP_CSV|default(True) %}
{% set keep_csv = params.KEEP_CSV|default(0)|int %}
{% set X, Y = False, False %}
@@ -27,10 +27,14 @@ gcode:
{ action_raise_error("AXIS selection invalid. Should be either all, x or y!") }
{% endif %}
{% if scv is none %}
{% if scv is none or scv == "" %}
{% set scv = printer.toolhead.square_corner_velocity %}
{% endif %}
{% if max_sm == "" %}
{% set max_sm = none %}
{% endif %}
{% if X %}
TEST_RESONANCES AXIS=X OUTPUT=raw_data NAME=x FREQ_START={min_freq} FREQ_END={max_freq} HZ_PER_SEC={hz_per_sec}
M400

2
K-ShakeTune/K-SnT_belts.cfg
View File

@@ -10,7 +10,7 @@ gcode:
{% set max_freq = params.FREQ_END|default(133.33)|float %}
{% set hz_per_sec = params.HZ_PER_SEC|default(1)|float %}
{% set keep_results = params.KEEP_N_RESULTS|default(3)|int %}
{% set keep_csv = params.KEEP_CSV|default(True) %}
{% set keep_csv = params.KEEP_CSV|default(0)|int %}
TEST_RESONANCES AXIS=1,1 OUTPUT=raw_data NAME=b FREQ_START={min_freq} FREQ_END={max_freq} HZ_PER_SEC={hz_per_sec}
M400

2
K-ShakeTune/K-SnT_vibrations.cfg
View File

@@ -15,7 +15,7 @@ gcode:
{% set accel_chip = params.ACCEL_CHIP|default("adxl345") %} # ADXL chip name in the config
{% set keep_results = params.KEEP_N_RESULTS|default(3)|int %}
{% set keep_csv = params.KEEP_CSV|default(True) %}
{% set keep_csv = params.KEEP_CSV|default(0)|int %}
{% set mid_x = printer.toolhead.axis_maximum.x|float / 2 %}
{% set mid_y = printer.toolhead.axis_maximum.y|float / 2 %}