98 lines
3.9 KiB
INI
98 lines
3.9 KiB
INI
# This file contains dummy gcode macros to inject them at Klipper startup
|
|
# by the Shake&Tune plugin in order to make them available in the UI.
|
|
# Indeed, system macros in Klipper are not available as buttons in Mainsail/Fluidd
|
|
# and this is a workaround to have a good and friendly UX when using Shake&Tune.
|
|
|
|
|
|
[gcode_macro EXCITATE_AXIS_AT_FREQ]
|
|
description: dummy
|
|
gcode:
|
|
{% set create_graph = params.CREATE_GRAPH|default(0) %}
|
|
{% set frequency = params.FREQUENCY|default(25) %}
|
|
{% set duration = params.DURATION|default(30) %}
|
|
{% set accel_per_hz = params.ACCEL_PER_HZ %}
|
|
{% set axis = params.AXIS|default('x') %}
|
|
{% set travel_speed = params.TRAVEL_SPEED|default(120) %}
|
|
{% set z_height = params.Z_HEIGHT %}
|
|
{% set accel_chip = params.ACCEL_CHIP %}
|
|
{% set params_filtered = {
|
|
"CREATE_GRAPH": create_graph,
|
|
"FREQUENCY": frequency,
|
|
"DURATION": duration,
|
|
"ACCEL_PER_HZ": accel_per_hz if accel_per_hz is not none else '',
|
|
"AXIS": axis,
|
|
"TRAVEL_SPEED": travel_speed,
|
|
"Z_HEIGHT": z_height if z_height is not none else '',
|
|
"ACCEL_CHIP": accel_chip if accel_chip is not none else ''
|
|
} %}
|
|
_EXCITATE_AXIS_AT_FREQ {% for key, value in params_filtered.items() if value is not none and value != '' %}{key}={value} {% endfor %}
|
|
|
|
|
|
[gcode_macro AXES_MAP_CALIBRATION]
|
|
description: dummy
|
|
gcode:
|
|
{% set dummy = params.Z_HEIGHT|default(20) %}
|
|
{% set dummy = params.SPEED|default(80) %}
|
|
{% set dummy = params.ACCEL|default(1500) %}
|
|
{% set dummy = params.TRAVEL_SPEED|default(120) %}
|
|
_AXES_MAP_CALIBRATION {rawparams}
|
|
|
|
|
|
[gcode_macro COMPARE_BELTS_RESPONSES]
|
|
description: dummy
|
|
gcode:
|
|
{% set freq_start = params.FREQ_START|default(5) %}
|
|
{% set freq_end = params.FREQ_END|default(133.33) %}
|
|
{% set hz_per_sec = params.HZ_PER_SEC|default(1) %}
|
|
{% set accel_per_hz = params.ACCEL_PER_HZ %}
|
|
{% set travel_speed = params.TRAVEL_SPEED|default(120) %}
|
|
{% set z_height = params.Z_HEIGHT %}
|
|
{% set params_filtered = {
|
|
"FREQ_START": freq_start,
|
|
"FREQ_END": freq_end,
|
|
"HZ_PER_SEC": hz_per_sec,
|
|
"ACCEL_PER_HZ": accel_per_hz if accel_per_hz is not none else '',
|
|
"TRAVEL_SPEED": travel_speed,
|
|
"Z_HEIGHT": z_height if z_height is not none else ''
|
|
} %}
|
|
_COMPARE_BELTS_RESPONSES {% for key, value in params_filtered.items() if value is not none and value != '' %}{key}={value} {% endfor %}
|
|
|
|
|
|
[gcode_macro AXES_SHAPER_CALIBRATION]
|
|
description: dummy
|
|
gcode:
|
|
{% set freq_start = params.FREQ_START|default(5) %}
|
|
{% set freq_end = params.FREQ_END|default(133.33) %}
|
|
{% set hz_per_sec = params.HZ_PER_SEC|default(1) %}
|
|
{% set accel_per_hz = params.ACCEL_PER_HZ %}
|
|
{% set axis = params.AXIS|default('all') %}
|
|
{% set scv = params.SCV %}
|
|
{% set max_smoothing = params.MAX_SMOOTHING %}
|
|
{% set travel_speed = params.TRAVEL_SPEED|default(120) %}
|
|
{% set z_height = params.Z_HEIGHT %}
|
|
{% set params_filtered = {
|
|
"FREQ_START": freq_start,
|
|
"FREQ_END": freq_end,
|
|
"HZ_PER_SEC": hz_per_sec,
|
|
"ACCEL_PER_HZ": accel_per_hz if accel_per_hz is not none else '',
|
|
"AXIS": axis,
|
|
"SCV": scv if scv is not none else '',
|
|
"MAX_SMOOTHING": max_smoothing if max_smoothing is not none else '',
|
|
"TRAVEL_SPEED": travel_speed,
|
|
"Z_HEIGHT": z_height if z_height is not none else ''
|
|
} %}
|
|
_AXES_SHAPER_CALIBRATION {% for key, value in params_filtered.items() if value is not none and value != '' %}{key}={value} {% endfor %}
|
|
|
|
|
|
[gcode_macro CREATE_VIBRATIONS_PROFILE]
|
|
description: dummy
|
|
gcode:
|
|
{% set dummy = params.SIZE|default(100) %}
|
|
{% set dummy = params.Z_HEIGHT|default(20) %}
|
|
{% set dummy = params.MAX_SPEED|default(200) %}
|
|
{% set dummy = params.SPEED_INCREMENT|default(2) %}
|
|
{% set dummy = params.ACCEL|default(3000) %}
|
|
{% set dummy = params.TRAVEL_SPEED|default(120) %}
|
|
{% set dummy = params.ACCEL_CHIP %}
|
|
_CREATE_VIBRATIONS_PROFILE {rawparams}
|