IDM scanner
介绍
idm scanner 上位机python代码 修改自beacon
软件架构
软件架构说明
安装教程
解压后拖到klipper文件夹所在的用户目录 执行install.sh
使用说明
[idm] serial:/dev/serial/by-id/usb-IDM_614e_473431383817584A-if00
#/dev/serial/by-id/usb-1a86_USB2.0-Ser_-if00-port0
Path to the serial port for the idm device. Typically has the form
/dev/serial/by-id/usb-idm_idm_...
speed: 40.
Z probing dive speed.
lift_speed: 5.
Z probing lift speed.
backlash_comp: 0.5
Backlash compensation distance for removing Z backlash before measuring
the sensor response.
x_offset: 0.
X offset of idm from the nozzle.
y_offset: 21.1
Y offset of idm from the nozzle.
trigger_distance: 2.
idm trigger distance for homing.
trigger_dive_threshold: 1.5
Threshold for range vs dive mode probing. Beyond `trigger_distance +
trigger_dive_threshold` a dive will be used.
trigger_hysteresis: 0.006
Hysteresis on trigger threshold for untriggering, as a percentage of the
trigger threshold.
cal_nozzle_z: 0.1
Expected nozzle offset after completing manual Z offset calibration.
cal_floor: 0.1
Minimum z bound on sensor response measurement.
cal_ceil:5.
Maximum z bound on sensor response measurement.
cal_speed: 1.0
Speed while measuring response curve.
cal_move_speed: 10.
Speed while moving to position for response curve measurement.
default_model_name: default
Name of default idm model to load.
mesh_main_direction: x
Primary travel direction during mesh measurement.
#mesh_overscan: -1
Distance to use for direction changes at mesh line ends. Omit this setting
and a default will be calculated from line spacing and available travel.
mesh_cluster_size: 1
Radius of mesh grid point clusters.
mesh_runs: 2
Number of passes to make during mesh scan.
serial改成你自己的 probe项可以删了
参与贡献
- Fork 本仓库
- 新建 Feat_xxx 分支
- 提交代码
- 新建 Pull Request
特技
- 使用 Readme_XXX.md 来支持不同的语言，例如 Readme_en.md, Readme_zh.md
- Gitee 官方博客 blog.gitee.com
- 你可以 https://gitee.com/explore 这个地址来了解 Gitee 上的优秀开源项目
- GVP 全称是 Gitee 最有价值开源项目，是综合评定出的优秀开源项目
- Gitee 官方提供的使用手册 https://gitee.com/help
- Gitee 封面人物是一档用来展示 Gitee 会员风采的栏目 https://gitee.com/gitee-stars/