113 lines
4.6 KiB
INI
113 lines
4.6 KiB
INI
################################################
|
|
###### STANDARD INPUT_SHAPER CALIBRATIONS ######
|
|
################################################
|
|
# Written by Frix_x#0161 #
|
|
# @version: 1.5
|
|
|
|
# CHANGELOG:
|
|
# v1.5: modified EXCITATE_AXIS_AT_FREQ to allow A or B belt testing
|
|
# v1.4: added possibility to only run one axis at a time for the axes shaper calibration
|
|
# v1.3: added possibility to override the default parameters
|
|
# v1.2: added EXCITATE_AXIS_AT_FREQ to hold a specific excitating frequency on an axis and diagnose mechanical problems
|
|
# v1.1: added M400 to validate that the files are correctly saved to disk
|
|
# v1.0: first version of the automatic input shaper workflow
|
|
|
|
|
|
### What is it ? ###
|
|
# This macro helps you to configure the input shaper algorithm of Klipper by running the tests sequencially and calling an automatic script
|
|
# that generate the graphs, manage the files and so on. It's basically a fully automatic input shaper calibration workflow.
|
|
# Results can be found in your config folder using FLuidd/Maisail file manager.
|
|
|
|
# The goal is to make it easy to set, share and use it.
|
|
|
|
# Usage:
|
|
# 1. Call the AXES_SHAPER_CALIBRATION macro, wait for it to end and compute the graphs. Then look for the results in the results folder.
|
|
# 2. Call the BELTS_SHAPER_CALIBRATION macro, wait for it to end and compute the graphs. Then look for the results in the results folder.
|
|
# 3. If you find out some strange noise, you can use the EXCITATE_AXIS_AT_FREQ macro to diagnose the origin
|
|
|
|
|
|
[gcode_macro AXES_SHAPER_CALIBRATION]
|
|
description: Perform standard axis input shaper tests on one or both XY axes to select the best input shaper filter
|
|
gcode:
|
|
{% set verbose = params.VERBOSE|default(true) %}
|
|
{% set min_freq = params.FREQ_START|default(5)|float %}
|
|
{% set max_freq = params.FREQ_END|default(133.3)|float %}
|
|
{% set hz_per_sec = params.HZ_PER_SEC|default(1)|float %}
|
|
{% set axis = params.AXIS|default("all")|string|lower %}
|
|
|
|
{% set X, Y = False, False %}
|
|
|
|
{% if axis == "all" %}
|
|
{% set X, Y = True, True %}
|
|
{% elif axis == "x" %}
|
|
{% set X = True %}
|
|
{% elif axis == "y" %}
|
|
{% set Y = True %}
|
|
{% else %}
|
|
{ action_raise_error("AXIS selection invalid. Should be either all, x or y!") }
|
|
{% endif %}
|
|
|
|
{% if X %}
|
|
TEST_RESONANCES AXIS=X OUTPUT=raw_data NAME=x FREQ_START={min_freq} FREQ_END={max_freq} HZ_PER_SEC={hz_per_sec}
|
|
M400
|
|
|
|
{% if verbose %}
|
|
RESPOND MSG="X axis frequency profile generation..."
|
|
RESPOND MSG="This may take some time (1-3min)"
|
|
{% endif %}
|
|
RUN_SHELL_COMMAND CMD=plot_graph PARAMS=SHAPER
|
|
{% endif %}
|
|
|
|
{% if Y %}
|
|
TEST_RESONANCES AXIS=Y OUTPUT=raw_data NAME=y FREQ_START={min_freq} FREQ_END={max_freq} HZ_PER_SEC={hz_per_sec}
|
|
M400
|
|
|
|
{% if verbose %}
|
|
RESPOND MSG="Y axis frequency profile generation..."
|
|
RESPOND MSG="This may take some time (1-3min)"
|
|
{% endif %}
|
|
RUN_SHELL_COMMAND CMD=plot_graph PARAMS=SHAPER
|
|
{% endif %}
|
|
|
|
|
|
[gcode_macro BELTS_SHAPER_CALIBRATION]
|
|
description: Perform a custom half-axis test to analyze and compare the frequency profiles of individual belts on CoreXY printers
|
|
gcode:
|
|
{% set verbose = params.VERBOSE|default(true) %}
|
|
{% set min_freq = params.FREQ_START|default(5)|float %}
|
|
{% set max_freq = params.FREQ_END|default(133.33)|float %}
|
|
{% set hz_per_sec = params.HZ_PER_SEC|default(1)|float %}
|
|
|
|
TEST_RESONANCES AXIS=1,1 OUTPUT=raw_data NAME=b FREQ_START={min_freq} FREQ_END={max_freq} HZ_PER_SEC={hz_per_sec}
|
|
M400
|
|
|
|
TEST_RESONANCES AXIS=1,-1 OUTPUT=raw_data NAME=a FREQ_START={min_freq} FREQ_END={max_freq} HZ_PER_SEC={hz_per_sec}
|
|
M400
|
|
|
|
{% if verbose %}
|
|
RESPOND MSG="Belts comparative frequency profile generation..."
|
|
RESPOND MSG="This may take some time (3-5min)"
|
|
{% endif %}
|
|
RUN_SHELL_COMMAND CMD=plot_graph PARAMS=BELTS
|
|
|
|
|
|
[gcode_macro EXCITATE_AXIS_AT_FREQ]
|
|
description: Maintain a specified input shaper excitation frequency for a period of time to diagnose and locate a source of vibration
|
|
gcode:
|
|
{% set frequency = params.FREQUENCY|default(25)|int %}
|
|
{% set time = params.TIME|default(10)|int %}
|
|
{% set axis = params.AXIS|default("x")|string|lower %}
|
|
|
|
{% if axis not in ["x", "y", "a", "b"] %}
|
|
{ action_raise_error("AXIS selection invalid. Should be either x, y, a or b!") }
|
|
{% endif %}
|
|
|
|
{% if axis == "a" %}
|
|
{% set axis = "1,-1" %}
|
|
{% elif axis == "b" %}
|
|
{% set axis = "1,1" %}
|
|
{% endif %}
|
|
|
|
TEST_RESONANCES OUTPUT=raw_data AXIS={axis} FREQ_START={frequency-1} FREQ_END={frequency+1} HZ_PER_SEC={1/(time/3)}
|
|
M400
|